Essay on Business Research Methods, Part Ii - 1616 Words

Running Head: BUSINESS RESEARCH METHODS, PART II Business Research Methods, Part II University of Phoenix QNT/HC561: Applied Business in Research Statistics in Health Care Group ID: MBAY0ZATZ9 Erik Kirk, PhD August 22, 2011 Introduction Recently, Learning Team â€Å"A† was tasked with developing a research question arising from an organizational dilemma faced by the Physical Therapy Clinic. As a result of preliminary research analysis, the team determined constraints in clinical practice were having a negative impact on the therapist’s ability to fully meet patient needs. A proposal was submitted to organizational leadership that included recommendations to utilize a standard six-step research question hierarchy process. The†¦show more content†¦Patient was injured at work loading crates. Patient was reinjured knee falling on ice while shoveling snow. Mechanism of injury, patient reports decrease in mobility. Patient was injured during high school soccer game. 3) Has there been prior therapy for same condition? o Yes ïÆ' ¼ No ïÆ' ¼ Yes o No o Yes ïÆ' ¼ No 4) What does patient states overall health is currently? o Poor ïÆ' ¼ Good o Excellent ïÆ' ¼ Poor o Good o Excellent o Poor o Good ïÆ' ¼ Excellent 5) What is the patient’s social history/living environment? Lives with his wife and three children Widow and lives alone. Lives at home with parents. 6) What is the patient’s prior level of function? Works out occasionally Has no time to exercise. Trains daily with team during season and works out regularly during off season. 7) What is the patient’s current functional level? Have no limitations. Advance onset of arthritis present in both knees. Have no limitations. 8) Is the physical therapy clinic a provider within the patient’s insurance plan and will the therapy be covered? PPO plan that covers up to $1000 for physical therapy, however he also will be getting workers compensation. Medicare supplemental, with a doctor’s order medicare covers physical therapy and the supplemental insurance will cover the co-payments. PPO plan that covers up to $1000 for physical therapy 12) Did the patient have a doctor’s referral for the physical therapy? o Yes ïÆ' ¼ No ïÆ' ¼ Yes o No o No ïÆ' ¼ YesShow MoreRelatedQnt 561 Complete Class Essay963 Words   |  4 Pageshttp://homeworkonestop.com/qnt-561-complete-class Product Description QNT 561 (Applied Business Research and Statistics ) Week 1 Individual Week One Practice Problems Complete the following Week One Practice Problems in MyStatLab ®: †¢ Ch. 2 of Statistics for Business and Economics o 2.37, 2.38, 2.44, 2.46, 2.54, 2.64, 2.68, 2.79, 2.85, 2.89, 2.93, 2.94, 2.106, and 2.108 †¢ Ch. 4 of Statistics for Business and Economics o 4.1, 4.12, 4.13, 4.21, 4.79, 4.80, 4.81, 4.89, 4.91, 4.106, and 4.124 Read MoreThe Benefits Of Erp Systems For Small And Mid Size Organizations1160 Words   |  5 PagesBusiness Research Topic The objective of my research is to study the use of Information Technology and particularly ERP (Enterprise Resource Planning) system for small and mid-size organizations. There was a time when IT and large Information Systems were used only by large organizations. That was the time when the cost of technology was high and the mid-size and large organizations were not able to afford the high cost of ERP systems (Vieru, 2015). With time, the cost of computing has come downRead MoreQuality Management Curriculums906 Words   |  4 Pagescurriculums: In Kansas state university IE’s students take during the four years courses to build their knowledge for industrial and Manufacturing system engineering to leading the business when graduates lead companies or a department. In the these is years students take Statistical Quality Control, Ergonomics, Operation Research, Industrial Simulation, Production and planning inventory control, Manufacturing Information systems, Manufacturing processes Laboratory, Industrial Facilities Layout and DesignRead MoreModule Content And Teaching Program Essay1557 Words   |  7 Pagesproduction Ç€, the basic breeding methods and the limits (2 hr) †¢ The latest biotechnology options for crop improvement and production II, tissue culture (2 hr) †¢ The latest biotechnology options for crop improvement and production III, somatic hybridization (2 hr) †¢ The latest biotechnology options for crop improvement and production IV, genetic engineering I (2 hr) †¢ The latest biotechnology options for crop improvement and production IV, genetic engineering II (2 hr) †¢ The latest biotechnologyRead MoreDante1739 Words   |  7 PagesInternational University IU QUANTITATIVE METHODS FOR BUSINESS (FALL 2013) SAMPLE TEST MIDTERM EXAMINATION PART 01: MULTIPLE CHOICE QUESTIONS (20 POINTS) 1. (1 pt) Given the following two-person game, which strategy can be eliminated by use of dominance? Y1 Y2 13 0 X2 6 8 X3 12 14 a. X2 c. Y2 b. Y1 e. X1 d. X3 The following payoff table is using for next 6 questions. 2. (1 pt) What decision would an optimist make? a. Alternative 1 c. State ofRead MoreA New Joe on the Block1540 Words   |  7 Pagescompetitors in the market, how far his coffee shop with the competitor, how the competitors run their business, when people crowded the area and the location of the supplier. b) Popular coffee shop: Find the consumer behaviour and study more details about them and find out the benchmark for the coffee shop to make people know the coffee shop. c) The consumption pattern: from the research he made he noticed that people in the United States like the local taste of coffee and like the tasteRead MoreQuestionnaire On Business Research Methods1415 Words   |  6 Pages Assessment 2 (Part A) Questionnaire Development (BMO6630) Business Research Methods Submitted to: Mr. Charles Jebarajakirthy Submitted By: Baldish Kaur (4490938) Kiranpreet Kaur (4492272) Statement of the Research This Questionnaire is designed to address the â€Å"Management problem in Airline industry due to the rapid growth of Low Cost Carriers† (LCCs) which especially increase the demand of Low cost travel. With the help of this survey, we will help theRead MoreIntroduction to Research Methods1682 Words   |  7 Pagesfor this Course 4. Teaching Method 5. Course Assessment 6. Lecture 1 2 ï  ½ This course provides students who might engage in research at some point in their studies and/or working career understanding on ââ€" ¦ the basic principles of business research ââ€" ¦ how to use research analytics in decisionmaking Course Outcomes 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Develop research questions and translate the questions into research objectives and hypotheses. SelectRead MoreComponents Of Sales Training Process1639 Words   |  7 Pageswhich the members of the sales force possesses the skills, attitudes, perceptions, and behaviors, required to be successful. This performance testing is conduct to determine the proficiency of salespeople in particular area, such as product knowledge. ii. Setting Training Objectives After determining which areas in which the training is needed, training objectives should be set. Although, many objectives may vary by training, the general main objectives of setting training objective is to increase salesRead MoreQualitative Research On The Limited Group Essay1452 Words   |  6 PagesQualitative research is suitable if the limited group is under examines. The data is relatively short in quantity in this type of study (Trochim, 2001). Caracary (2009) delivers a qualitative study the opportunity to researcher to actively involve himself with organizational process and to comprehend the phenomena behind comparison and confusions. Myers (2007, p.6) acknowledged the qualitative research was produced in social science with specific end goal to support the researcher in studies including

Factors Affecting Solubility Free Essays

string(174) " be written with all ions, or without the spectator ions \(the ion that don’t react, present on both sides of the reaction\), a format known as the net ionic equation\." There are three main factors that control solubility of a solute. (1) Temperature (2) Nature of solute or solvent (3) Pressure EFFECT OF TEMPERATURE Generally in many cases solubility increases with the rise in temperature and decreases with the fall of temperature but it is not necessary in all cases. However we must follow two behaviours: In endothermic process, solubility increases with the increase in temperature and vice versa. We will write a custom essay sample on Factors Affecting Solubility or any similar topic only for you Order Now For example: solubility of potassium nitrate increases with the increase in temperature. In exothermic process, solubility decrease with the increase in temperature. For example: solubility of calcium oxide decreases with the increase in temperature. Gases are more soluble in cold solvent than in hot solvent. NATURE OF SOLUTE AND SOLVENT Solubility of a solute in a solvent purely depends on the nature of both solute and solvent. A polar solute dissolved in polar solvent. Solubility of a non-polar solute in a solvent is large. A polar solute has low solubility or insoluble in a non-polar solvent. EFFECT OF PRESSURE The effect of pressure is observed only in the case of gases. An increase in pressure increases of solubility of a gas in a liquid. For example carbon dioxide is filled in cold drink bottles (such as coca cola, Pepsi 7up etc. ) under pressure. Properties of Solution Concentration The concentration of a solution is the measure of how much solute and solvent there is. A solution is concentrated if it contains a large amount of solute, or dilute if contains a small amount. Molarity Molarity is the number of moles of solute per litre of solution. It is abbreviated with the symbol M, and is sometimes used as a unit of measurement, e. g. a 0. 3 molar solution of HCl. In that example, there would be 3 moles of HCl for every 10 litres of water (or whatever the solvent as). Molality Molality is the number of moles of solute per kilogram of solvent. It is abbreviated with the symbol m (lowercase), and is sometimes used as a unit of measurement, e. g. a 0. 3 molal solution of HBr. In that example, there would be 3 moles of HBr for every 10 kilograms of water (or whatever the solvent was). Mole Fraction The mole fraction is simply the moles of solute per moles of solution. As an example, you dissolve one mole of NaCl into three moles of water. Remember that the NaCl will dissociate into its ions, so there are now five moles of particles: one mole Na+, one mole Cl-, and three moles water. The mole fraction of sodium is 0. 2, the mole fraction of chloride is 0. 2, and the mole fraction of water is 0. 6. The mole fraction is symbolized with the Greek letter (chi), which is often written simply as an X. Dilution Dilution is adding solvent to a solution to obtain a less concentrated solution. Perhaps you have used dilution when running a lemonade stand. To cut costs, you could take a half-full jug of rich, concentrated lemonade and fill it up with water. The resulting solution would have the same total amount of sugar and lemon juice, but double the total volume. Its flavour would be weaker due to the added water. The key concept is that the amount of solute is constant before and after the dilution process. The concentration is decreased (and volume increased) only by adding solvent. Thus, the number of moles of solute before and after dilution are equal. moles1 = moles2 By definition of molarity, you can find the moles of solvent. M x V = moles Substituting the second equation into the first gives the dilution equation. M1 x V1 = M2 x V2 To determine the amount of solvent (usually water) that must be added, you must know the initial volume and concentration, and the desired concentration. Solving for V2 in the above equation will give you the total volume of the diluted solution. Subtracting the initial volume from the total volume will determine the amount of pure solvent that must be added. Ionic Solutes When ionic compounds dissolve in water, they separate into ions. This process is called dissociation. Note that because of dissociation, there are more moles of particles in the solution containing ions than there would be with the solute and solvent separated. If you have two glasses of water, and you dissolve salt into one and sugar into the other, there will be a big difference in concentration. The salt will dissociate into its ions, but sugar (a molecule) will not dissociate. If the salt were NaCl, the concentration would be double that of the sugar. If the salt were MgCl2, the concentration would be triple (there are three ions). Solubility Rules Not all ionic compounds are soluble. Some ionic compounds have so much attractive force between their anions and cations that they will not dissociate. These substances are insoluble and will not dissolve. Instead, they clump together as a solid in the bottom of solution. Many ionic compounds, however, will dissociate in water and dissolve. In these cases, the attractive force between ion and water is greater than that between cation and anion. There are several rules to help you determine which compounds will dissolve and which will not. Solubility Rules 1. All compounds with Group 1 ions or ammonium ions are soluble. 2. Nitrates, acetates, and chlorates are soluble. 3. Compounds containing a halogen are soluble, except those with fluorine, silver, or mercury. If they have lead, they are soluble only in hot water. 4. Sulfates are soluble, except when combined with silver, lead, calcium, barium, or strontium. . Carbonates, sulfides, oxides, silicates, and phosphates are insoluble, except for rule #1. 6. Hydroxides are insoluble except when combined with calcium, barium, strontium, or rule #1. Sometimes, when two different ionic compounds are dissolved, they react, forming a precipitate that is insoluble. Predicting these reactions requires knowledge of the activity series and solubility rules. These reactions can be wri tten with all ions, or without the spectator ions (the ion that don’t react, present on both sides of the reaction), a format known as the net ionic equation. You read "Factors Affecting Solubility" in category "Papers" For example, silver nitrate is soluble, but silver chloride is not soluble (see the above rules). Mixing silver nitrate into sodium chloride would cause a cloudy white precipitate to form. This happens because of a double replacement reaction. Electrolytes When solutes dissociate (or if a molecule ionizes), the solution can conduct electricity. Compounds that readily form ions, thus being good conductors, are known as strong electrolytes. If only a small amount of ions are formed, electricity is poorly conducted, meaning the compound is a weak electrolyte. A strong electrolyte will dissolve completely. All ions dissociate. A weak electrolyte, on the other hand, will partially dissociate, but some ions will remain bonded together. Colligative Properties Some properties are the same for all solute particles regardless of what kind. These are known as the colligative properties. These properties apply to ideal solutions, so in reality, the properties may not be exactly as calculated. In an ideal solution, there are no forces acting between the solute particles, which is generally not the case. Vapor Pressure All liquids have a tendency for their surface molecules to escape and evaporate, even if the liquid is not at its boiling point. This is because the average energy of the molecules is too small for evaporation, but some molecules could gain above average energy and escape. Vapor pressure is the measure of the pressure of the evaporated vapor, and it depends on the temperature of the solution and the quantities of solute. More solute will decrease vapor pressure. The vapor pressure is given by Rauolt’s Law, where X is the mole fraction of the solvent. Notice that the vapor pressure equals that of the pure solvent when there is no solute (X = 1). If X = 0, there would be no vapor pressure at all. This could only happen if there were no solvent, only solute. A solid solute has no vapor pressure. P solution = P pure solvent (X solvent) If two volatile substances (both have vapor pressures) are in solution, Rauolt’s Law is still used. In this case, Rauolt’s Law is essentially a linear combination of the vapor pressures of the substances. Two liquids in solution both have vapor pressures, so this equation must be used. P solution = P1 (X1) + P2(X2) The second equation shows the relationship between the solvents. If two liquids were mixed exactly half-and-half, the vapor pressure of the resulting solution would be exactly halfway between the vapor pressures of the two solvents. Another relation in Henry’s Law, which shows the relationship between gas and pressure. It is given by Cg = k Pg , where C is concentration and P is pressure. As the pressure goes up, the concentration of gas in solution must also increase. This is why soda cans release gas when they are opened – The decrease in pressure results in a decrease in concentration of CO2 in the soda. Boiling Point Elevation A liquid reaches its boiling point when its vapor pressure is equal to the atmosphere around it. Because the presence of solute lowers the vapor pressure, the boiling point is raised. The boiling point increase is given by: ?T solution = Kb X m solution The reduced vapor pressure increases the boiling point of the liquid only if the solute itself is non-volatile, meaning it doesn’t have a tendency to evaporate. For every mole of non-volatile solute per kilogram of solvent, the boiling point increases by a constant amount, known as the molal boiling-point constant (Kb). Because this is a colligative property, K2 is not affected by the kind of solute. Freezing Point Depression A liquid reaches its freezing temperature when its vapor pressure is equal to that of its solid form. Because the presence of the solute lowers the vapor pressure, the freezing point is lowered. The freezing point depression is given by: ? T solution = K f X m solute Again, this equation works only for non-volatile solutes. The temperature of the freezing point decreases by a constant amount for every one mole of solute added per kilogram solvent. This constant (K f) is known as the molar freezing-point constant. Osmosis If you studied biology, you would know that osmosis is the movement of water through a membrane. If two solutions of different molarity are placed on opposite sides of a semipermiable membrane, then water will travel through the membrane to the side with higher molarity. This happens because the water molecules are â€Å"attached† to the solvent molecules, so they cannot travel through the membrane. As a result, the water on the side with lower molarity can more easily travel through the membrane than the water on the other side. The pressure of this osmosis is given in the equation. ? = MRT Where pi is the pressure, M is molarity, R is the gas constant, and T is temperature in Kelvin. Electrolytes and Colligative Properties When one mole of table salt is added to water, the colligative effects are double those that would have occurred if sugar were added instead. This is because the salt dissociates, forming twice as many particles as sugar would. This dissociation, called the Van’t Hoff Factor describes how many particles that are dissociated into the solution and must be multiplied into the Boiling Point Elevation or Vapor Pressure Lowering equations. Different ways of expressing the concentration of solutions Mass Percentage The mass percentage of a component in a given solution is the mass of the component per 100g of the solution. For e. g. , if WA is the mass of the component A, WB is the mass of the component B in a solution. Then, Example: A 10% solution of sodium chloride in water (by mass) means that 10g of sodium chloride are present in 100g of the solution. Volume percentage This unit is used in case of a liquid dissolved in another liquid. The volume percentage is defined as the volume of the solute per 100 parts by volume of solution. For e. g. , If VA is the volume of component A present is Vsol volume of the solution. Then, For e. g. , a 10% solution of ethanol C2H5OH, in water (by volume) means that 10cm3 of ethanol is present in 100cm3 of the solution. Strength of a solution is defined as the amount of the solute in gms, present in one litre of the solution. It is expressed as gL-1. Mathematically, Molarity Molarity of a solution is defined as the number of moles of solute dissolved per litre of solution. Mathematically, For e. g. , If ‘a’ is the weight of the solute (in gms) present in VCC volume of the solution. Then, Molarity is expressed by the symbol M. It can also be expressed as, Normality Normality of a solution is defined as the number of gram equivalents (gm. e) of a solute dissolved per litre of the given solution. Mathematically it is, For e. g. , If a is the weight of the solute (in gms) present in VCC volume of the solution. Then, Normality is expressed by the symbol N. It can also be expressed as, Relationship between molarity and normality The molarity and normality of a solution is related to each other as follows: Molality Molality of a solution is defined as the number of moles of solute dissolved in 1000g of a solvent. Mathematically, it is expressed as Molality is expressed by the symbol m. Molality does not change with temperature. Formality In case of ionic compounds like KCl, CaCO3 etc. Formality is used in place of molarity. It is the number of gram formula masses of solute dissolved per liter of the solution. It is denoted by the symbol F. Mathematically it is given as, Mole Fraction It is the ratio of number of moles of one component (solute or solvent) to the total number of moles of all the components (solute and solvent) present in the solution. It is denoted by the symbol X. Let us suppose that a solution contains two components A and B and suppose that nA moles of A and nB moles of B are present in the solution then, Adding eq (i) and (ii) we get XA + XB = 1 Parts per million (ppm) When a solute is present in very small amounts, its concentration is expressed in parts per million. It is defined as the amount of the solute present in one million parts of the solution. It may be noted that the concentration units like molarity, mole fraction etc. are preferred as they involve the weight of the solute and solvent, which is independent of the temperature. But units like, molarity, normality etc. , involve volume of the solution, hence changes with temperature. How to cite Factors Affecting Solubility, Papers

The Importance of Nutrition and Exercise Essay Example For Students

The Importance of Nutrition and Exercise Essay The importance of Nutrition, and Exercise Many students today ask why they are so tired all the time. It also seems that people in college become stressed out either because of grades or because of work. All people need to do is get the right amount of sleep, eating well, and exercise in order to feel better about themselves and feel good in general. This is not a short process. Most experts say that it takes about twelve weeks in order to see results. Nevertheless, it is guaranteed that after that duration of time one will see a vast improvement in oneself. Sleep is something that most people take for granted. It is the one thing that people are willing to compromise even more then food or money. It is estimated that 40 to 60 million Americans are sleep deprived. Different people can get by with different amounts of sleep. Some can survive the next day with only a few hours. We will write a custom essay on The Importance of Nutrition and Exercise specifically for you for only $16.38 $13.9/page Order now Then there are others who cannot be called after 9:00 because they need those good solid 10 hours. The average person actually needs anywhere from between 7-9 hours a night. Why does one need sleep? When human bodies do not get enough sleep, they tend to lose strength, the immune system decreases, and there is an increase in blood pressure. As students, it can effect concentration, memory, logical reasoning, and ability to do math. When going to bed it should take about 15 to 20 minutes to fall asleep. If a half-hour has gone by and one still is not asleep, one should get up and do something relaxing such as take a warm bath or watch television. Another key aspect is nutrition. Nutrition is the main thing that keeps the body working. Therefore, if one wants to keep the body working at a certain pace it needs to be fed. However, one needs to know the right foods. Think of the body as a car. People drive cars every day and some drive fast and some drive slow. Nevertheless, all cars need gas eventually. Every car driver knows that the better quality of the gas the better the car drives and performs. Bodies are the same way. For that reason, there is the nutrition pyramid to tell us what our bodies need the most and the least of. It is important to incorporate refined carbohydrates, proteins, vegetables, and fruit to ones diet everyday to ensure that the body works. The body also needs some sugar and fat. Today, people focus on non-fat foods. Sometimes these are not good for the body because in order to make something natural fat-free you have to put in chemicals to alter the original make up of the food. Chemicals are difficult for your body to digest therefore in a case, as this it is best to go natural. Another reason that one needs to eat some fat and sugar is because this is what the body burns when you exercise. Exercise is what separates the boys from the men. In other words, this is the number one thing that must be done to maintain a healthy body. First, one needs to know their body and what their body can endure. That depends on age, weight, and current level of fitness. The last factor determines how fast ones body burns fat. Second, be consistent in your routine. Next, understand that different programs work for different people. People tend to go by the fad when it comes to picking an exercise program. Do some shopping around to see which exercise is not only fit for you but also is something that you will enjoy. Aerobic exercise is an example. Aerobic exercise is exercise, which essentially uses aerobic pathways to provide energy to the muscles involved. It is sometimes called a endurance exercise which means that the heart rate is raised to 70 to 85% of your age predicted Maximum Heart Rate (MHR), and held at that point for a uninterrupted 20 to 30 minutes. Another example is weight-bearing exercises. This includes picking up weights that are a portion of your body weight. .ue48dfed20f62a13ac063f741397517e9 , .ue48dfed20f62a13ac063f741397517e9 .postImageUrl , .ue48dfed20f62a13ac063f741397517e9 .centered-text-area { min-height: 80px; position: relative; } .ue48dfed20f62a13ac063f741397517e9 , .ue48dfed20f62a13ac063f741397517e9:hover , .ue48dfed20f62a13ac063f741397517e9:visited , .ue48dfed20f62a13ac063f741397517e9:active { border:0!important; } .ue48dfed20f62a13ac063f741397517e9 .clearfix:after { content: ""; display: table; clear: both; } .ue48dfed20f62a13ac063f741397517e9 { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .ue48dfed20f62a13ac063f741397517e9:active , .ue48dfed20f62a13ac063f741397517e9:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .ue48dfed20f62a13ac063f741397517e9 .centered-text-area { width: 100%; position: relative ; } .ue48dfed20f62a13ac063f741397517e9 .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .ue48dfed20f62a13ac063f741397517e9 .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .ue48dfed20f62a13ac063f741397517e9 .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .ue48dfed20f62a13ac063f741397517e9:hover .ctaButton { background-color: #34495E!important; } .ue48dfed20f62a13ac063f741397517e9 .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .ue48dfed20f62a13ac063f741397517e9 .ue48dfed20f62a13ac063f741397517e9-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .ue48dfed20f62a13ac063f741397517e9:after { content: ""; display: block; clear: both; } READ: LaptopsPalm(99) Essay To remain in shape one does not have .

Positive and Negetive Aspects of Emergency Care and Emergency Rooms essays

Positive and Negetive Aspects of Emergency Care and Emergency Rooms essays Many problems face the emergency room staff in their efforts to care for a variety of patients with a variety of needs and injuries. One of the negative aspects faced in the emergency room is the very real possibility of misdiagnosis because of the frenzied environment and the element of time are two of the reasons emergency room patients may be misdiagnosed. One researcher notes, "For example, an emergency room physician is sometimes forced to make a decision on the basis of inadequate patient information. Instant information about the patient's medical history, allergies, and medications would decrease the incidence of these forced errors" (Bogner 149). In addition, often the emergency room staff work long shifts, and during particularly busy shifts they may become overly tired and more prone to make mistakes in diagnosis and treatment. One emergency room failed to detect a punctured intestine in an elderly woman, and she collapsed two days later with peritonitis. Another failed to x-ray a young mountain biking accident victim, and two days later, he collapsed with a broken neck (Bogner 57, 151). These are examples of misdiagnosis and treatments that could have been prevented, and this is one negative aspect of busy emergency rooms, they may simply miss some symptoms, or misdiagnose some patients because of time constraints or shoddy information. Another negative aspect of emergency care is the overcrowding of many emergency rooms, and the long wait patients may have to endure, which can actually add to their medical woes. In fact, in 2001, only 3 percent of national emergency rooms said they never experienced overcrowding, and the problem is expected to get worse for a number of reasons ("Overcrowding," 2001). First, there is a nationwide shortage of nurses, and this translates into personnel shortages in all areas of the hospital, including the emergency room. ...

Word Choice Deprecate vs. Depreciate

Word Choice Deprecate vs. Depreciate Word Choice: Deprecate vs. Depreciate When something loses value, has it â€Å"deprecated† or â€Å"depreciated†? Many use these terms interchangeably, but they’re actually importantly distinct. And since you don’t want to make mistakes in your written work, it’s a good idea to know the difference! In this post, we clarify the meanings of â€Å"deprecate† and â€Å"depreciate,† then set out how (and when) they should be used. Deprecate (To Express Disapproval) To â€Å"deprecate† something is to express disapproval of it, or to belittle something: Although popular, reality TV shows are often deprecated by professional critics. This is also why we say someone making a joke at their own expense is being â€Å"self-deprecating.† Another old-fashioned use of â€Å"deprecate† is to â€Å"pray away† (such as praying for protection against an evil). It’s rarely used like this now though, so youre not likely to encounter it other than in old religious texts. Depreciate (To Reduce in Value) The main meaning of â€Å"depreciate† is to â€Å"reduce or underestimate in value.† Most commonly, it refers to something having lost monetary value: If not properly maintained, properties will depreciate over time. This use is reflected in the notion of â€Å"depreciation,† a financial term for a method used by businesses to account for the declining value of assets: Before investing in infrastructure, you should calculate the expected rate of depreciation. Confusion with â€Å"deprecate† arises because â€Å"depreciate† can sometimes mean â€Å"belittle,† but to â€Å"depreciate† something in this sense is specifically to describe it has having little value. Deprecate or Depreciate? These terms are particularly tricky since they’re similarly spelled as well as fairly close in meaning. However, since â€Å"depreciate† has a very specific financial sense, you don’t want to confuse them. As a general rule, if you’re discussing the value of something or finances in general, the term to use will be â€Å"depreciate.† However, if you’re referring to something being belittled – without necessarily impacting upon its perceived value – the correct word is â€Å"deprecate.† Similarly, if someone is self-mocking, they are â€Å"self-deprecating†. Remember: Deprecate = Belittle Depreciate = Lose value

Business Research Report Essay Example | Topics and Well Written Essays - 1000 words

Business Research Report - Essay Example Introduction to sector There is high specialization in services delivered in air travel, a feature that distinct the industry from other forms of service delivery. The achievement of sustainable economic advantage by a firm in the industry defines the ‘for profit’ strategic management. It involves proper evaluation and planning of a firm’s context of industry (the environment) as well as the creation of a viable sustainable competitive differentiation for the survival and profitability of the business. Qantas Company has enjoyed dominance due to the strategic niche it occupies having already well established itself in the aviation industry over years (Morton, 22). The Qantas operates within the transport service industry with her main areas of operations being in offering freights services both locally within Australia and internationally. Qantas company survival and dominance within the air transport industry lean on the strategic factors acting as barriers to en try, which restricts other firms from entering in the industry. These include the high capital base requirement in order to venture into the industry, relatively low fares which do not warrant survival for a new entrant to the industry and the overall effect of her operation as a dominant player in this industry. Research question The management of the firm must have and apply the most appropriate business strategies that would help the business in the competitive industry. In this study therefore, the management requires an appropriate mechanism, through which the strategy of customer loyalty and CSR can be applied within the industry for the purpose of effectiveness and efficiency in performance. Therefore, this research study intends to answer the following question: what favorable CSR and loyalty strategy should the organization in aviation industry (Qantas) employ for profitability and improved performance? Evaluation Current Organizational Performance In this analysis, we anal yze Qantas, which is an Australian air travel company, which specializes not only on local flights but also in international carriage (Anon para 1-3). In her own vision, Qantas intends to become the Australia’s best business in the future and compete favorably in the international scene. Political influences in the operations of the company in the industry oversaw her privatization since 1995, and ever since have seen the company run profitably until the recent challenge posed at the international environment, which saw a decline in her profitability. The international scene has seen the emergence of new cheaper airlines within the Asian region, which poses a great threat to the company. Moreover, the fall of profitability in international operations of the company has been another cause of alarm to the macro-economic environment of the Qantas airline. The global economic crisis of the period around 2008 oversaw the shaking of the Qantas profitability through the inflation of the Australian currency, which affected the tourism and the business travel within the country. Qantas VRIO model analysis: The VRIO model as a tool of business analysis is adopted to show what firm resources, and capabilities drive sustainable competitive advantage of the particular firm in the context of competition with the rival groups (â€Å"

MEDIA ANALYSIS Essay Example | Topics and Well Written Essays - 750 words

MEDIA ANALYSIS - Essay Example For example when the photograph of Miriam is introduced to the priest, he quickly jumps to the conclusion that Elijah is guilty of the sexual assault however upon learning more information one quickly learn that he is the least likely to be the one guilty of the crime. The narrative structure takes on a kind of ratchet formula in which the story quickly takes steps forward only to immediately takes a step back which is a common theme across many detective shows. In regards to how the narrative structure is plotted around moments of disruption there are frequent incidences that centre on this theme. For example one can quickly identify the deception from Elijah as he originally escapes from the police, when "The Devil" quickly assaults Detective Elliot Stabler in the bathroom. What these actions imply is that there is a relative moment of tranquility before the aforementioned incidents and it is the case that this affects the narrative insofar as it causes moments of excitement. Lastly there is the case of issues of resolution. Whilst several resolutions were in fact brought about they brought with them severe consequences. By having Elijah identifies â€Å"The Devil of Ghulu† it in fact would bring resolution to the countless people that he harmed but will cost Elijah his freedom. By having Miriam identify the war criminal she in fact can help aide in his conviction however she would bring about her own unpleasant feelings. By Elijah taking refuge in the Church he in fact eliminates his chances of ever gaining American citizenship. As such the narrative of the story implies that there is in fact not supposed to be any clean and clear resolution. The character types that are utilized to effectively tell this story are the dynamic character as epitomized by Elijah who was the child soldier who ends up doing everything he can to help Miriam. The ‘Foil